CApture™ Portable Fuming Systems

The CApture Portable Fuming System quickly fixes latent fingerprints at the crime scene using microburst or traditional CA fuming methods, while protecting the user from hazardous fumes. Its patented* design combines all the components needed in one compact system: a heater to heat the Super Glue†; a shatter-resistant, clear protective chamber to contain the fumes as they react with the latent prints; an exhaust blower; and particulate/carbon exhaust filter. No ducting is required. Since prints may be easily developed at the scene, irrelevant evidence may be ruled out thus saving valuable laboratory processing time and storage space. Power field kit allows you to fume in the field!

SPECIFICATIONS:

• 115 volts, 60 Hz, 1 amp 115 volts, 13 amps
• Weighs: 24lbs
• Patented* collapsible design. All components nest together into a compact package with handle for easy transport.
• Leveling foot with locking pin stabilizes the developer in an upright position. For transport, the foot is retractable to its full "Up" position.
• Easy to use. A video, available in DVD and online, provides clear instruction on proper set up and use of the CApture.
• Built-in blower pulls air from the chamber, through the filter and exhausts it from the system back into the room. An accessory Exhaust Connection Kit allows the developer to be exhausted out a window or into a fume hood.
• Optional field power kit allows user to take unit into field where no power outlet is available. This option is recommended for users seeking full mobility and usability at any crime scene
• Three-way heater/off/vent switch activates the heater during print development and activates the vent after prints have been fixed.
• LCD displays the current heater temperature setting while in programming mode and actual heater temperature while in operating mode.
• Inverter ready. Low energy usage of 75 watts allows the CApture to run on car battery when connected to a user-supplied inverter.
• Durable epoxy-coated steel housing.
• Microprocessor-controlled heater allows the user to set the temperature in one degree increments between 120° to 350° F (50° to 177° C). Once set, the temperature of the heater stabilizes at the set point (+/-15° F) within 3 to 5 minutes.
• Two heater receptacles hold heater pans, one with a small amount of Super Glue™ or equivalent CA adhesive, and one with a small amount of water if needed. A door keeps heat contained. A pair of needle-nose pliers is included for safe handling near hot surfaces. Ten heater pans are included.
• Particulate/activated carbon filter cartridge traps smoke and CA fumes exhausted from the chamber. The long-lasting cartridge has capacity for 100 development cycles.
• Clear, shatter-resistant chamber, interior dimensions 8" w x 8" d x 16" high, provides visibility to the evidence during the fuming process. Constructed of polycarbonate, the durable chamber serves as the carrying case during transport.

SYSTEM INCLUDES:

• Shelf
• Hanging Clip
• Heater Pans and Pliers